The Arctic, Saharan-like Gulf Coast

Today, we’re going to take a look at another less-covered VIIRS channel on this blog: M-9, also known as the “cirrus band”. (Disambiguation: if you’re looking for the electronic musical group “Cirrus (band)“, you’re in the wrong place.) We don’t use M-9 on this blog much because it doesn’t often provide amazing images. But, it is used for a lot of practical applications, so it is worth knowing about. We are also going to say “Hello!” to Suomi-NPP’s baby brother, NOAA-20, and welcome a new VIIRS instrument in space!

Unlike M-8, the “cirrus band” (PDF) is on nearly all of the new geostationary satellites (except Himawari). It’s also on MODIS, Landsat, and several other polar-orbiting satellite imagers. The “cirrus band” is unique in that it is highly sensitive to water vapor, but is located in the near-IR (1.38 µm) where emission from the Earth is minimal. (So, contrary to popular belief, VIIRS does have a water vapor channel. It just doesn’t behave like the typical mid-wave IR water vapor channels most people are used to.)

Electromagnetic radiation at 1.38 µm is absorbed by water vapor. But, the Earth and its atmosphere are too cold to emit much at this wavelength. (Thankfully, or we would have all melted by now.) Of course, the sun is hot enough. This means the 1.38 µm radiation coming from the sun is absorbed by water vapor in our atmosphere, and the only* radiation making its way back to VIIRS is what is reflected off of clouds above the water vapor. This makes channels centered at 1.38 µm particularly useful at identifying thin cirrus that would otherwise blend in with the background on other channels. Hence, the name “cirrus band”. (* Of course, reflection off of high clouds is not the only source, as we shall see. That’s the reason for this blog post.)

So, high clouds are white and the background is black – this is the assumption when looking at VIIRS’s cirrus band (unless you’re using a funky color table). But, take a look at this image that S-NPP VIIRS took on 17 January 2018:

S-NPP VIIRS channel M-9 ("cirrus band") image from 18:34 UTC, 17 January 2018

S-NPP VIIRS channel M-9 (“cirrus band”) image from 18:34 UTC, 17 January 2018

On my monitor, viewing angle makes a big difference as to how bright the features appear. If you are viewing this on a laptop or tablet, your screen is much easier to adjust that than my Jumbotron if it’s hard to see. You can also move your head around and see if anyone else looks at you funny. (This is also a good way to test out a TV in the store before you buy it. Will people sitting off to the side get the same view as someone directly in front of the TV? You might want to know that if hosting a party for the big game this weekend.)

Let’s zoom in on the area in question:

S-NPP VIIRS channel M-9 image from 18:34 UTC, 17 January 2018

S-NPP VIIRS channel M-9 image from 18:34 UTC, 17 January 2018

And, give the image maximum contrast:

S-NPP VIIRS channel M-9 image displayed with maximum contrast (18:34 UTC, 17 January 2018)

S-NPP VIIRS channel M-9 image displayed with maximum contrast (18:34 UTC, 17 January 2018)

There is a feature in that image that looks awfully like the coastline of the Gulf of Mexico stretching from Louisiana to the Florida panhandle. It sure looks like you can see the Mississippi River, the Tennessee River, and all the “lakes” in eastern Texas. But, I thought water vapor was supposed to absorb all the radiation before it made it to the surface! And, this is Louisiana we’re talking about. The entire coastal region of the state is a big swamp – I mean a collection of bayous. So, there should be plenty of water vapor around.

One would expect to see all the way to the surface in high-altitude arid areas, like the Bolivian Altiplano and the upper elevations of the Atacama Desert. And, you do:

S-NPP VIIRS channel M-9 image from 18:32 UTC, 1 June 2017

S-NPP VIIRS channel M-9 image from 18:32 UTC, 1 June 2017.

But, one does not expect to see the surface of Louisiana at 1.38 µm, since it is so close to sea level and it is one of the most humid parts of the United States. Maybe something is wrong with S-NPP VIIRS? Let’s look at our new baby, NOAA-20 VIIRS:

NOAA-20 VIIRS channel M-9 image (19:25 UTC, 17 January 2018)

NOAA-20 VIIRS channel M-9 image (19:25 UTC, 17 January 2018)

And, once again, with maximum contrast:

NOAA-20 VIIRS channel M-9 image displayed with maximum contrast (19:25 UTC, 17 January 2017)

NOAA-20 VIIRS channel M-9 image displayed with maximum contrast (19:25 UTC, 17 January 2017)

Note that NOAA-20 was launched back in November 2017, and is still undergoing post-launch testing and checkout, so it has not been declared operational just yet. But, this is a good test for the new VIIRS. It can see the same surface features S-NPP did 50 minutes earlier. And, it means that both instruments are working. So, why can we see all the way to the surface of Louisiana in the “cirrus band”? Because, the atmosphere was incredibly dry.

Here’s the sounding from Slidell, LA (on the other side of Lake Pontchartrain from New Orleans) on 12 UTC 17 January 2018. Notice the precipitable water value (“PWAT”) is 2.47, which is reported on soundings in mm. That’s just less than 0.1 inches. The nearby soundings taken at Shreveport and Lake Charles reported PWATs of 2.45 mm and 2.77 mm, respectively. Normal for this time of year is about 7 times greater! (Note that he corrected his typo.)

To put this into perspective, this was drier than the Sahara Desert was a few days later:

NOAA-20 VIIRS channel M-9 image displayed with maximum contrast (12:40 UTC, 22 January 2018)

NOAA-20 VIIRS channel M-9 image displayed with maximum contrast (12:40 UTC, 22 January 2018)

Notice you can’t see the surface of the Sahara, indicating there was more water vapor in the air over the desert than there was over Louisiana. The only thing you can see are the cirrus clouds and other clouds that made it to the upper atmosphere. This is more typical of the “cirrus band”.

Now, back to Louisiana: the dry, Arctic airmass resulted in a number of record low temperatures. Plus, this was accompanied by snow, as seen by both S-NPP and NOAA-20:

S-NPP VIIRS True Color RGB composite of channels M-3, M-4 and M-5 (18:34 UTC 17 January 2018)

S-NPP VIIRS True Color RGB composite of channels M-3, M-4 and M-5 (18:34 UTC 17 January 2018)

NOAA-20 VIIRS True Color composite of channels M-3, M-4 and M-5 (19:25 UTC, 17 January 2018)

NOAA-20 VIIRS True Color composite of channels M-3, M-4 and M-5 (19:25 UTC, 17 January 2018)

Snow was reported all the way to Gulf Coast, and you can see evidence of it in the images around Houston, TX, which is pretty rare. But, wait! Why didn’t we see snow in the M-9 “cirrus band” images? Because snow is not very reflective at 1.38 µm, and it blends in with the background. To show what an interesting winter it has been, here’s a map put out by the Weather Prediction Center from 18 January 2018, showing estimated total snowfall accumulations for this winter (so far). Note that an area of Mississippi and Louisiana has had approximately the same amount of snow as most of Iowa and southern Wisconsin (and even here in Northern Colorado!). All 48 contiguous United States have received measurable snowfall!

Fun fact: you can open one of the True Color images in a new browser tab, and the other image in this tab and toggle back and forth between them. This allows you to see the clouds move, and the edges of the snowfield melt. If you have eagle eyes, you can also see that the S-NPP image is sharper on the east side of the image (close to its nadir), while the NOAA-20 image is sharper on the west side (close to its nadir). The satellites are both in the same orbit, but on opposite sides of the Earth. Since the Earth is constantly rotating underneath them, and the VIIRS swath is designed to fill all the gaps at the Equator (unlike MODIS), their ground tracks at low and mid-latitudes are separated by half the width of a VIIRS swath. Nadir for one VIIRS is near the edge of the swath of the other VIIRS. (But, not at high latitudes.) The distance from Tallahassee, Florida to Houston, Texas is a pretty good rule of thumb for the spatial distance between the two satellites when they’re over the United States. Fifty minutes is a good rule of thumb for the temporal distance between them (and this is true all over the globe).

So, for once, Louisiana was colder than the Arctic (Ocean, at least) and drier than the Sahara Desert!

Hurricane Isaac: Before, During and After

While Hurricane Isaac (then a tropical storm) did not destroy Tampa, Florida as many people feared, it certainly left its mark on the Gulf Coast. With many locations from Florida to Louisiana receiving more than 12″ of rain, and levees unable to keep out the storm surge, flooding was (and still is) a major problem. Look at these aerial photos of Isaac’s aftermath in Louisiana. The Visible Infrared Imaging Radiometer Suite (VIIRS) aboard Suomi NPP saw that flooding, also.

But first, let’s look at the high resolution infrared (IR) window channel (I-05, 11.45 µm) which, at ~375 m resolution, is the highest-resolution IR window channel on a public weather satellite in space today. This image was taken when Isaac was still a tropical storm in the middle of the Gulf of Mexico:

VIIRS I-05 image of Tropical Storm Isaac, taken 18:50 UTC 27 August 2012

VIIRS I-05 image of Tropical Storm Isaac, taken 18:50 UTC 27 August 2012

This image uses a new (to this blog, anyway) color scale, developed by our colleagues at CIMSS, that really highlights the structure of the clouds at the top of Isaac. The color scale is included in the image. For comparison, here’s the GOES Imager IR window channel (channel 4, 10.7 µm) image from roughly the same time:

GOES-13 Imager channel 4 image of Tropical Storm Isaac, taken 18:45 UTC 27 August 2012

GOES-13 Imager channel 4 image of Tropical Storm Isaac, taken 18:45 UTC 27 August 2012

GOES has ~4 km resolution in its IR channels. VIIRS provides amazing details of the structure of tropical cyclones that you just can’t get with current geostationary satellites.

The real story from Isaac, however, is the flooding. It’s hard to capture flooding from a visible and infrared imaging instrument, since flooding usually occurs when it’s cloudy. Clouds block the view of the surface when looking at visible and infrared wavelengths. But, large quantities of water that fail to evaporate or drain into the local rivers after a period of several days can be seen after the skies clear. That’s what happened with Isaac.

Here are before-Isaac and after-Isaac images of the southern tip of the Florida Peninsula. These are false color (“pseudo-true color”) composites of VIIRS channels I-01, I-02 and I-03. These images were taken on the afternoon overpasses of 23 August and 29 August 2012. Many cities on the east coast of Florida got 10-16 inches of rain (250-400 mm for those of you outside the U.S.). See if you can pick out the flooding.

False color RGB composite of VIIRS channels I-01, I-02 and I-03 taken before and after Tropical Storm Isaac (2012)

False color RGB composite of VIIRS channels I-01, I-02 and I-03 taken before and after Tropical Storm Isaac (2012)

If you have been following this blog, you know that, in the “pseudo-true color” RGB composite, water shows up very dark – in most cases, almost black. That’s not always true, of course. You can see sun glint (particularly in the “before” image) that makes water a lighter color and shallow water (where visible radiation [i.e. channel I-01] is able to penetrate to the bottom) shows up as a vivid blue.

Now, notice the Everglades. Many areas of the Everglades, particularly on the east side, appear darker in the “after” image, because those swampy areas have a lot more water in them. Water has a lower reflectivity than vegetation or bare ground at these wavelengths.

The effect of water on the land surface shows up even better in the moderate resolution channel M-06 (0.75 µm). M-06 is a channel not shown before because it is perhaps the worst channel for producing interesting images. M-06 was designed to aid in ocean color retrievals and/or other uses that require atmospheric correction. The M-06 detectors saturate at a low radiance, so any radiation at 0.75 µm that reflects off of clouds, aerosols or the land surface easily show up. About the only things that have low reflectivity in M-06 are atmospheric gases and water surfaces without sun glint. Ocean color retrievals need a very clean atmosphere with no aerosols or clouds and no sun glint to work correctly. You also need to be able to identify what is or is not water, which is what makes M-06 useful for identifying flooding.

Here are the similar before-Isaac and after-Isaac images of Florida from M-06:

VIIRS channel M-06 images of southern Florida taken before and after Tropical Storm Isaac (2012)

VIIRS channel M-06 images of southern Florida taken before and after Tropical Storm Isaac (2012)

Both the land and optically thick clouds saturate M-06, so this channel is useless at identifying clouds over land (except you can see some cloud shadows). Sun glint is saturating the pixels over the Gulf of Mexico in the “before” image, while it is mostly to the east of Florida in the Atlantic Ocean in the “after” image. In the “after image”, reflective cirrus clouds over the Gulf of Mexico show up that are not as easily visible in the RGB composite. Of primary importance here, however, is the dark appearance of the Everglades in the “after” image. All that flood water reduced the reflectivity of the land surface, making it appear darker. That means, if you know where the clouds (and, hence, the cloud shadows) are, it may be possible to use M-06 to identify large flooded areas.

Louisiana and the coast of Mississippi were the hardest hit by Isaac, and the flooding is easily visible here, too. In fact, the massive flooding is easier to see in the RGB composite in this region. Compare the “before” and “after” images, taken on 26 August 2012 and 1 September 2012:

False color RGB composites of VIIRS channels I-01, I-02 and I-03 of southeast Louisiana

False color RGB composites of VIIRS channels I-01, I-02 and I-03 of southeast Louisiana

To make it easier to see, here’s a quick animation of the before and after images. Watch the highlighted areas.

Animated GIF of false color RGB composites taken from VIIRS before and after Hurricane Isaac

Animated GIF of false color RGB composites taken from VIIRS before and after Hurricane Isaac

After the passage of Hurricane Isaac, Lake Maurepas and Lake Pontchartrain almost appear to merge into one big lake! Other flooding is visible near Slidell, Bay St. Louis, Pascagoula Bay, and the heavily hit parishes of Plaquemines, St. Bernard, Lafourche and Terrebonne.

Thin cirrus clouds are visible in the “after” image, which limit the ability of M-06 to detect some of the flooding, but M-06 is still able to see the large areas of flooding highlighted in the animation above. M-06 also detects reflection off of the Twin Spans as well as the Lake Pontchartrain Causeway. And this is at ~750 m resolution!

VIIRS channel M-06 images of southeastern Louisiana taken before and after Hurricane Isaac (2012)

VIIRS channel M-06 images of southeastern Louisiana taken before and after Hurricane Isaac (2012)

So, don’t try to do ocean color retrievals in pixels obscured by big bridges.