Ice, Ice, Baby

A winter storm moved through the Northeast U.S. over the weekend of 19-20 January 2019. This Nor’easter was a tricky one to forecast. Temperatures near the coast were expected to be near (or above) freezing. Temperatures inland were expected to be much colder. Liquid-equivalent precipitation, at least according to the GFS, was predicted to be in the 1-3 inch (25-75 mm) range the day before. This could easily convert to 1-2 feet (30-60 cm) of snow. The question on everyone’s mind: who gets the rain, who gets the snow, and who gets the “wintry mix”? The fates of ~40 million people hang in the balance. This is one of the situations that meteorologists live for!

The difference between 71°F and 74°F is virtually meaningless. The difference between 31°F and 34°F (with heavy precipitation, at least) is the difference between closing schools or staying open. It’s the difference between bringing out the plows or keeping them in the garage; paying overtime for power crews to keep the electricity flowing or just another work day; shutting down public transportation or life as usual.

Of course, the obvious follow-up question is: what is the “wintry mix” going to be? Rain mixed with snow? Sleet? Freezing rain? It doesn’t take much to change from one to the other, but there can be a big difference on the resulting impacts based on what ultimately falls from the sky.

So, what happened? Here’s an article that does a good job of explaining it. And, here are PDF files of the storm reports from National Weather Service Forecast Offices in Albany, Boston (actually in Norton, MA) and New York City (actually in Upton, NY). The synopsis: some places received ~1.5 inches (~38 mm) of rain, some places received ~11 inches (~30 cm) of snow and some places were coated in up to 0.6 inches (15 mm) of ice.

Of particular relevance here are the locations that received the ice. If you took the locations listed in the storm reports that had more than 0.1 inches (2.5 mm) of ice (at least the ones in Connecticut) and plotted them on a map, they match up quite well with this map of power outages that came from the article I linked to:

Map of power outages in Connecticut as a result of an ice storm (19-20 January 2019)

Map of power outages in Connecticut as a result of an ice storm (19-20 January 2019). Image courtesy Eversource/NBC Connecticut.

Now, compare that map with this VIIRS image from 22 January 2019 (after the clouds cleared out):

VIIRS channel I-3 image from NOAA-20, 17:09 UTC 22 January 2019

VIIRS channel I-3 image from NOAA-20, 17:09 UTC 22 January 2019

As always, you can click on the image to bring up the full resolution version. This is the high-resolution imagery band, I-3, centered at 1.6 µm from NOAA-20. Notice that very dark band stretching from northern New Jersey into northern Rhode Island? That’s where the greatest accumulation of ice was. Notice how well it matches up with the known power outages across Connecticut!

The ice-covered region appears dark at 1.6 µm because ice is very absorbing at this wavelength and, hence, it’s not very reflective. And, since it is cold, it doesn’t emit radiation at this wavelength either (at least, not in any significant amount). This is especially true for pure ice, as was observed here (particularly the second image), since there aren’t any impurities in the ice to reflect radiation back to the satellite. The absorbing nature of snow and ice compared with the reflective nature of liquid clouds is what earned this channel the nickname “Snow/Ice Band” (PDF).

At shorter wavelengths (less than ~ 1 µm), ice and snow are reflective. (Note how a coating of ice makes everything sparkle in the sunlight.) This makes it nearly impossible to tell where the ice accumulation was in True Color images:

VIIRS True Color RGB composite of channels M-3, M-4 and M-5 from NOAA-20, 17:09 UTC 22 January 2019

VIIRS True Color RGB composite of channels M-3, M-4 and M-5 from NOAA-20, 17:09 UTC 22 January 2019

The Natural Color RGB (which the National Weather Service forecasters know as the Day Land Cloud RGB (PDF file)) includes the 1.6 µm band, which is what makes it useful for discriminating clouds from snow and ice. And, as expected, the region of ice accumulation does show up (although it is tempered by the highly reflective nature of snow and ice in the visible and “veggie” bands that make up the other components of the RGB):

VIIRS Natural Color RGB composite of channels, I-1, I-2 and I-3 from NOAA-20 (17:09 UTC, 22 January 2019)

VIIRS Natural Color RGB composite of channels, I-1, I-2 and I-3 from NOAA-20 (17:09 UTC, 22 January 2019)

Another RGB composite popular with forecasters is the Day Snow/Fog RGB (PDF file), where blue is related to the brightness temperature difference between 10.7 µm and 3.9 µm, green is the 1.6 µm reflectance, and red is the reflectance at 0.86 µm (the “veggie” band). This shows the region of ice even more clearly than the Natural Color RGB:

VIIRS Day Snow/Fog RGB composite of channels (I-5 - I-4), I-3 and I-2 from NOAA-20 (17:09 UTC, 22 January 2019)

VIIRS Day Snow/Fog RGB composite of channels (I-5 minus I-4), I-3 and I-2 from NOAA-20 (17:09 UTC, 22 January 2019)

Breaking things up into the individual components, we can see how the ice transitions from being reflective in the visible and near-infrared (near-IR) to absorbing in the shortwave-IR:

VIIRS high-resolution visible channel, I-1, from NOAA-20 (17:09 UTC, 22 January 2019)

VIIRS high-resolution visible channel, I-1 (0.64 µm), from NOAA-20 (17:09 UTC, 22 January 2019)

VIIRS high-resolution "veggie" channel, I-2, from NOAA-20 (17:09 UTC, 22 January 2019)

VIIRS high-resolution “veggie” channel, I-2 (0.86 µm), from NOAA-20 (17:09 UTC, 22 January 2019)

VIIRS channel M-8 from NOAA-20 (17:09 UTC, 22 January 2019)

VIIRS channel M-8 (1.24 µm) from NOAA-20 (17:09 UTC, 22 January 2019)

VIIRS channel M-11  from NOAA-20 (17:09 UTC, 22 January 2019)

VIIRS channel M-11 (2.25 µm) from NOAA-20 (17:09 UTC, 22 January 2019)

Of course, the 1.6 µm image was already shown, so I didn’t bother to repeat it. If you squint, you can even see a hint of the ice signature at 1.38 µm, the “Cirrus Band“, where most of the surface signal is blocked by water vapor absorption in the atmosphere:

VIIRS "cirrus" channel, M-9, from NOAA-20 (17:09 UTC 22 January 2019)

VIIRS “cirrus” channel, M-9 (1.38 µm), from NOAA-20 (17:09 UTC 22 January 2019)

If the ice had accumulated in southern New Jersey or Pennsylvania, though, it would not have shown up in this channel, since the air was too moist at this time to see all the way down to the surface. But, you can compare this image with the previous images to see why they call it the “cirrus band”, since the cirrus does show up much more clearly here.

So, mark this down as another use for VIIRS: detecting areas impacted by ice storms. And remember, even though ice storms may have a certain beauty, they are also dangerous. And, not just for the obvious reasons. This storm in particular came complete with ice missiles. So, for the love of everyone else on the road, scrape your car clean of ice before risking your life out there!

Don’t Eat Orange Snow

Roughly one month ago, social media (and, later, more conventional media) outlets were inundated with numerous reports of orange snow in eastern Europe and western Asia – reports like this one, this one and this one. Of course, it wouldn’t really be a hit with the media unless someone could claim it was “apocalyptic”. And of course, the apocalypse didn’t happen. It was simply Saharan dust picked up by high winds from an intense mid-latitude cyclone and deposited far away. We’ve seen this before with VIIRS.

These reports focused on Sochi, Russia, home of the 2014 Winter Olympics. Unfortunately, every time I looked for it in VIIRS imagery, it was cloudy in Sochi. But, the plume of Saharan dust that caused this event was clearly visible over the Mediterranean:

NOAA-20 VIIRS true color composite of channels M-3, M-4 and M-5 (10:03 UTC 25 March 2018)

NOAA-20 VIIRS true color composite of channels M-3, M-4 and M-5 (10:03 UTC 25 March 2018)

This image came from our new NOAA-20 VIIRS, which, at this point, is not operational and undergoing additional testing. If you look closer, you might also notice smoke or smog over Poland in the image above (upper left corner). If you really zoom in (click on the image to get to the full resolution version), you may notice a brownish tint to the snow along the north shore of the Black Sea – where the BBC report I linked to listed additional sightings of orange snow. But, the dust-covered snow shows up more clearly in this “before and after” image courtesy of S-NPP VIIRS and the @NOAASatellites twitter account:

"Before" and "After" S-NPP VIIRS true color images from 22 March 2018 (left) and 25 March 2018 (right) showing dust on snow in eastern Europe.

“Before” and “After” S-NPP VIIRS true color images from 22 March 2018 (left) and 25 March 2018 (right).

(As an aside: differences in technique used to produce these true color images are likely larger than the differences between S-NPP VIIRS and NOAA-20 VIIRS, so don’t read too much into the fact that the dust-on-snow appears more clearly in the @NOAASatellites image than in my own.)

But, dust-on-snow is not limited to areas within a few thousand kilometers of the Sahara Desert. (It is limited to areas within 40,000 km of the Sahara [in the horizontal dimension, at least], since that is roughly the circumference of the Earth – and assuming you ignore dust storms on Mars.) Dust on snow can happen anywhere you have snow within striking distance of a source of dust. Another example was captured by a new Landsat-like micro-satellite, Venµs, and its non-microsat predecessor, Sentinel-2B, Landsat’s European cousin. A more dramatic example happened last week right here in Colorado. Here is a VIIRS true color image of Colorado from S-NPP VIIRS, taken on 14 April 2018:

S-NPP VIIRS true color composite of channels M-3, M-4 and M-5 (19:45 UTC 14 April 2018)

S-NPP VIIRS true color composite of channels M-3, M-4 and M-5 (19:45 UTC 14 April 2018)

Here are similar images from NOAA-20 and S-NPP from 18 April 2018:

NOAA-20 VIIRS true color composite of channels M-3, M-4 and M-5 (19:20 UTC 18 April 2018)

NOAA-20 VIIRS true color composite of channels M-3, M-4 and M-5 (19:20 UTC 18 April 2018)

S-NPP VIIRS true color composite of channels M-3, M-4 and M-5 (20:11 UTC 18 April 2018)

S-NPP VIIRS true color composite of channels M-3, M-4 and M-5 (20:11 UTC 18 April 2018)

The trick is to compare these two images with the image from 14 April. The other trick is to know where you’re supposed to be looking. (Hint: we’re looking at the Sangre de Cristo mountains in southern Colorado.) Here’s a “before” and “after” image overlay trick I’ve used before. (You may have to refresh the page before it will work.) Both of these images are the S-NPP VIIRS ones, for simplicity:

If you slide the bar left to right, you should notice the snow is more brown in the mountains just right of center in the 18 April image. There are other areas where the snow melted between the two images, plus a couple of small clouds that add to the differences. Of course, this is only 750 m resolution. We get a better view with the 375m-resolution visible channel, I-1:

We lose the color information, of course, since we are looking at a single channel, but it is obvious the snow became less reflective in the 18 April image. And, we can prove that this was a result of dust. Here are the visible, true color, Dust RGB, “Blue Light Dust” and DEBRA Dust images from S-NPP on 17 April 2018, courtesy Steve M.:

S-NPP VIIRS true color composite of channels M-3, M-4 and M-5 (20:26 UTC 17 April 2018)

S-NPP VIIRS true color composite of channels M-3, M-4 and M-5 (20:26 UTC 17 April 2018)

S-NPP VIIRS Dust RGB image (20:26 UTC 17 April 2018)

S-NPP VIIRS Dust RGB image (20:26 UTC 17 April 2018)

S-NPP VIIRS Blue Light Dust image (20:26 UTC 17 April 2018)

S-NPP VIIRS Blue Light Dust image (20:26 UTC 17 April 2018)

S-NPP VIIRS DEBRA Dust image (20:26 UTC 17 April 2018)

S-NPP VIIRS DEBRA Dust image (20:26 UTC 17 April 2018)

If you are unfamiliar with them, we’ve looked at the Dust RGB, Blue Light Dust and DEBRA before, here and here. As seen in the above images, this was not a difficult to detect dust case. Even Landsat-8 captured this event, which is surprising given the narrow swath and 16-day orbit repeat cycle. (Sure, it’s higher resolution than VIIRS, but will it be overhead when you need it?)

So now we get to why dust-on-snow is important. There is a growing body of research (e.g. this paper) that shows dust-on-snow has a big impact on water resources in places like the Rocky Mountains. You see, dirty snow is less reflective than clean snow. That means it absorbs more solar radiation. This, in turn, means it heats up and melts faster, leading to earlier spring run-off. The end result is less water later in the season, which opens the door to wildfires and more severe droughts. This article that, coincidentally, was published as I was writing this, sums things up nicely. It is so important, the Center for Snow and Avalanche Studies has formed CODOS: the Colorado Dust on Snow Program, whose purpose is to monitor dust on snow and provide weekly updates.

As for why you shouldn’t eat orange snow, that should be obvious. You shouldn’t eat any snow that isn’t pure white (and even that might be risky). But, feel free to eat colorful ice, as long as you know where it came from.

The Arctic, Saharan-like Gulf Coast

Today, we’re going to take a look at another less-covered VIIRS channel on this blog: M-9, also known as the “cirrus band”. (Disambiguation: if you’re looking for the electronic musical group “Cirrus (band)“, you’re in the wrong place.) We don’t use M-9 on this blog much because it doesn’t often provide amazing images. But, it is used for a lot of practical applications, so it is worth knowing about. We are also going to say “Hello!” to Suomi-NPP’s baby brother, NOAA-20, and welcome a new VIIRS instrument in space!

Unlike M-8, the “cirrus band” (PDF) is on nearly all of the new geostationary satellites (except Himawari). It’s also on MODIS, Landsat, and several other polar-orbiting satellite imagers. The “cirrus band” is unique in that it is highly sensitive to water vapor, but is located in the near-IR (1.38 µm) where emission from the Earth is minimal. (So, contrary to popular belief, VIIRS does have a water vapor channel. It just doesn’t behave like the typical mid-wave IR water vapor channels most people are used to.)

Electromagnetic radiation at 1.38 µm is absorbed by water vapor. But, the Earth and its atmosphere are too cold to emit much at this wavelength. (Thankfully, or we would have all melted by now.) Of course, the sun is hot enough. This means the 1.38 µm radiation coming from the sun is absorbed by water vapor in our atmosphere, and the only* radiation making its way back to VIIRS is what is reflected off of clouds above the water vapor. This makes channels centered at 1.38 µm particularly useful at identifying thin cirrus that would otherwise blend in with the background on other channels. Hence, the name “cirrus band”. (* Of course, reflection off of high clouds is not the only source, as we shall see. That’s the reason for this blog post.)

So, high clouds are white and the background is black – this is the assumption when looking at VIIRS’s cirrus band (unless you’re using a funky color table). But, take a look at this image that S-NPP VIIRS took on 17 January 2018:

S-NPP VIIRS channel M-9 ("cirrus band") image from 18:34 UTC, 17 January 2018

S-NPP VIIRS channel M-9 (“cirrus band”) image from 18:34 UTC, 17 January 2018

On my monitor, viewing angle makes a big difference as to how bright the features appear. If you are viewing this on a laptop or tablet, your screen is much easier to adjust that than my Jumbotron if it’s hard to see. You can also move your head around and see if anyone else looks at you funny. (This is also a good way to test out a TV in the store before you buy it. Will people sitting off to the side get the same view as someone directly in front of the TV? You might want to know that if hosting a party for the big game this weekend.)

Let’s zoom in on the area in question:

S-NPP VIIRS channel M-9 image from 18:34 UTC, 17 January 2018

S-NPP VIIRS channel M-9 image from 18:34 UTC, 17 January 2018

And, give the image maximum contrast:

S-NPP VIIRS channel M-9 image displayed with maximum contrast (18:34 UTC, 17 January 2018)

S-NPP VIIRS channel M-9 image displayed with maximum contrast (18:34 UTC, 17 January 2018)

There is a feature in that image that looks awfully like the coastline of the Gulf of Mexico stretching from Louisiana to the Florida panhandle. It sure looks like you can see the Mississippi River, the Tennessee River, and all the “lakes” in eastern Texas. But, I thought water vapor was supposed to absorb all the radiation before it made it to the surface! And, this is Louisiana we’re talking about. The entire coastal region of the state is a big swamp – I mean a collection of bayous. So, there should be plenty of water vapor around.

One would expect to see all the way to the surface in high-altitude arid areas, like the Bolivian Altiplano and the upper elevations of the Atacama Desert. And, you do:

S-NPP VIIRS channel M-9 image from 18:32 UTC, 1 June 2017

S-NPP VIIRS channel M-9 image from 18:32 UTC, 1 June 2017.

But, one does not expect to see the surface of Louisiana at 1.38 µm, since it is so close to sea level and it is one of the most humid parts of the United States. Maybe something is wrong with S-NPP VIIRS? Let’s look at our new baby, NOAA-20 VIIRS:

NOAA-20 VIIRS channel M-9 image (19:25 UTC, 17 January 2018)

NOAA-20 VIIRS channel M-9 image (19:25 UTC, 17 January 2018)

And, once again, with maximum contrast:

NOAA-20 VIIRS channel M-9 image displayed with maximum contrast (19:25 UTC, 17 January 2017)

NOAA-20 VIIRS channel M-9 image displayed with maximum contrast (19:25 UTC, 17 January 2017)

Note that NOAA-20 was launched back in November 2017, and is still undergoing post-launch testing and checkout, so it has not been declared operational just yet. But, this is a good test for the new VIIRS. It can see the same surface features S-NPP did 50 minutes earlier. And, it means that both instruments are working. So, why can we see all the way to the surface of Louisiana in the “cirrus band”? Because, the atmosphere was incredibly dry.

Here’s the sounding from Slidell, LA (on the other side of Lake Pontchartrain from New Orleans) on 12 UTC 17 January 2018. Notice the precipitable water value (“PWAT”) is 2.47, which is reported on soundings in mm. That’s just less than 0.1 inches. The nearby soundings taken at Shreveport and Lake Charles reported PWATs of 2.45 mm and 2.77 mm, respectively. Normal for this time of year is about 7 times greater! (Note that he corrected his typo.)

To put this into perspective, this was drier than the Sahara Desert was a few days later:

NOAA-20 VIIRS channel M-9 image displayed with maximum contrast (12:40 UTC, 22 January 2018)

NOAA-20 VIIRS channel M-9 image displayed with maximum contrast (12:40 UTC, 22 January 2018)

Notice you can’t see the surface of the Sahara, indicating there was more water vapor in the air over the desert than there was over Louisiana. The only thing you can see are the cirrus clouds and other clouds that made it to the upper atmosphere. This is more typical of the “cirrus band”.

Now, back to Louisiana: the dry, Arctic airmass resulted in a number of record low temperatures. Plus, this was accompanied by snow, as seen by both S-NPP and NOAA-20:

S-NPP VIIRS True Color RGB composite of channels M-3, M-4 and M-5 (18:34 UTC 17 January 2018)

S-NPP VIIRS True Color RGB composite of channels M-3, M-4 and M-5 (18:34 UTC 17 January 2018)

NOAA-20 VIIRS True Color composite of channels M-3, M-4 and M-5 (19:25 UTC, 17 January 2018)

NOAA-20 VIIRS True Color composite of channels M-3, M-4 and M-5 (19:25 UTC, 17 January 2018)

Snow was reported all the way to Gulf Coast, and you can see evidence of it in the images around Houston, TX, which is pretty rare. But, wait! Why didn’t we see snow in the M-9 “cirrus band” images? Because snow is not very reflective at 1.38 µm, and it blends in with the background. To show what an interesting winter it has been, here’s a map put out by the Weather Prediction Center from 18 January 2018, showing estimated total snowfall accumulations for this winter (so far). Note that an area of Mississippi and Louisiana has had approximately the same amount of snow as most of Iowa and southern Wisconsin (and even here in Northern Colorado!). All 48 contiguous United States have received measurable snowfall!

Fun fact: you can open one of the True Color images in a new browser tab, and the other image in this tab and toggle back and forth between them. This allows you to see the clouds move, and the edges of the snowfield melt. If you have eagle eyes, you can also see that the S-NPP image is sharper on the east side of the image (close to its nadir), while the NOAA-20 image is sharper on the west side (close to its nadir). The satellites are both in the same orbit, but on opposite sides of the Earth. Since the Earth is constantly rotating underneath them, and the VIIRS swath is designed to fill all the gaps at the Equator (unlike MODIS), their ground tracks at low and mid-latitudes are separated by half the width of a VIIRS swath. Nadir for one VIIRS is near the edge of the swath of the other VIIRS. (But, not at high latitudes.) The distance from Tallahassee, Florida to Houston, Texas is a pretty good rule of thumb for the spatial distance between the two satellites when they’re over the United States. Fifty minutes is a good rule of thumb for the temporal distance between them (and this is true all over the globe).

So, for once, Louisiana was colder than the Arctic (Ocean, at least) and drier than the Sahara Desert!

On the Disappearance of Lake Mille Lacs

Two weeks ago, one of Minnesota’s 10,000 lakes disappeared, leaving them with only 9,999. And, it wasn’t a small one, either. It was the state’s second largest inland lake. But, this is not like Goose Lake, which actually did dry up. The lake in question simply became temporarily invisible. So, no need to panic, fishing and boating enthusiasts. But, as you’ll see, the term “invisible” can be just as ambiguous as the term “lake”.

Let’s start with the fact that Minnesota doesn’t have 10,000 lakes. Their slogan is a lie! Depending on how you define a lake, Minnesota has 21,871, or 15,291, or 11,842. But, Wisconsin might have more (or less) and likes to argue with Minnesota about that fact. Michigan might have way more (62,798) or way less (6,537). And, they all pale in comparison to the number of lakes in Alaska. Here is an article that explains the situation nicely.

With that out of the way, today’s story comes from “current GOES” and what one colleague noticed during a cursory examination of GOES Imager images. Here’s the GOES-13 visible image from 19:30 UTC 27 January 2017:

GOES-13 visible image, taken 19:30 UTC 27 January 2017

GOES-13 visible image, taken 19:30 UTC 27 January 2017

Compare that with the visible image from 19:15 UTC 2 February 2017:

GOES-13 visible image, taken 19:15 UTC 2 February 2017

GOES-13 visible image, taken 19:15 UTC 2 February 2017

Notice anything different between the two images over Minnesota? No? Then let’s flip back-and-forth between the two, with a giant, red arrow pointing to the area in question:

Animation of the above images

Animation of the above images. The red arrow points to Lake Mille Lacs.

The red arrow is pointing to the location of Lake Mille Lacs. You might know it as Mille Lacs Lake. (Either way, it’s name is redundant; “Mille Lacs” is French for “Thousand Lakes,” making it Thousand Lakes Lake.) As the above images show, on 27 January 2017 Lake Mille Lacs was not visible in the GOES image. On 2 February 2017, it was. They both look like clear days, so what happened? Why did Lake Mille Lacs disappear?

As I said before, the lake didn’t dry up. It simply became temporarily invisible. But, this requires a discussion about what it means to be “visible”. Lake Mille Lacs shows up in the image from 2 February 2017 because it appears brighter than the surrounding land. That’s because the lake is covered with snow. Aren’t the surrounding land areas also covered with snow? Yes. However, the surrounding lands also have trees which obscure the snow and shade the background surface, which is why forested areas appear darker even when there is snow.

That leads to this question: why does the lake appear darker on 27 January? Because it rained the week before. Want proof? Look at the almanac for Brainerd (NW of Lake Mille Lacs) for the period of 18-22 January 2017. Every day made it above freezing along with several days of rain. Much of the snow melted (including the snow on the lake). Want more proof? Here’s a video taken on the lake from 20 January 2017. See how Minnesotans drive around on frozen lakes – even in the rain? And, see how wet and slushy the surface of the ice is? This makes it appear darker than when there is fresh snow on top. If you’ve ever seen a pile of slush, you know it’s not bright white, but a dull gray color. The less reflective slush on the lake reduced the apparent brightness down to the level of the surrounding woodlands. That’s why the lake appeared to disappear.

Now, this is “current GOES” imagery. We can do better with VIIRS, since we have more channels to play with. And, as we all know, GOES-R successfully launched back in November 2016 and is now in orbit as GOES-16. This satellite has the first Advanced Baseline Imager (ABI) in space. The ABI has many of the same channels as VIIRS, so the following discussion applies to both instruments. “New” GOES will have up to 500 m resolution in the visible, which is much closer to VIIRS (375 m) than “current” GOES (1 km). That’s another thing to think about when we talk about what is visible and what isn’t.

Here are the VIIRS high-resolution visible (I-1) images that correspond to the GOES images above:

VIIRS high-resolution visible (I-1) image, taken 19:35 UTC 27 January 2017

VIIRS high-resolution visible (I-1) image, taken 19:35 UTC 27 January 2017

VIIRS high-resolution visible (I-1) image, taken 19:22 UTC 2 February 2017

VIIRS high-resolution visible (I-1) image, taken 19:22 UTC 2 February 2017

Although, we should probably focus on Minnesota. Here are the cropped images side-by-side:

Comparison between VIIRS high-resolution visible (I-1) images

Comparison between VIIRS high-resolution visible (I-1) images

Remember: you can click on any image to bring up the full resolution version.

Although Lake Mille Lacs is just barely visible in the image from 27 January, it’s much easier to see on 2 February. So, we get the same story from VIIRS that we got with GOES, which is good. That means we don’t have a major fault of a multi-million dollar satellite. It’s a “fault” of the radiative properties of slush, combined with the low resolution of the GOES images above.

Keep your eyes also on the largest inland lake in Minnesota: Red Lake. The Siamese twins of Upper and Lower Red Lake didn’t get as much rain as Lake Mille Lacs and its snow never fully melted, so its appearance doesn’t change much between the two images.

The GOES Imager also has a longwave infrared (IR) channel, and a mid-wave IR channel similar to VIIRS. Since the goal of this is not to compare GOES to VIIRS, but to show how these lakes appear at different wavelengths, we’ll stick to the VIIRS images. Here are the high-resolution VIIRS longwave IR images from the same times:

Comparison of VIIRS high-resolution longwave IR (I-5) images

Comparison of VIIRS high-resolution longwave IR (I-5) images

In both images, the lakes are nearly invisible! This is because the longwave IR is primarily sensitive to temperature changes, and the slush is nearly the same temperature as the background land surface. With no temperature contrast to key on, the lake looks just like the surrounding land. Although, if you zoom in and squint, you might say that Lake Mille Lacs is actually more visible in the image from 27 January. 27 January was a warmer day (click back on that Brainerd almanac), and the surrounding land warmed up more than the slushy ice on the lake. 2 February was much colder on the lake and the land. But, let this be a lesson that, just because the lake doesn’t show up, it doesn’t mean the lake doesn’t exist!

Something interesting happens when you look at the mid-wave IR. All the lakes are visible, and take on a similar brightness, no matter how slushy they are:

Comparison of VIIRS high-resolution mid-wave IR (I-4) images

Comparison of VIIRS high-resolution mid-wave IR (I-4) images

In this wavelength range, both reflection of solar energy and thermal emission are important. Snow, ice and slush are not reflective and they are cold, making the lakes appear darker than the surrounding land. The fact that the land surrounding Lake Mille Lacs and Red Lake is darker on 2 February than it is on 27 January is further proof that it was a colder day with more snow on the ground.

Here’s where we get to the advantage of VIIRS (and, soon, GOES-16): it has more channels in the shortwave and near-IR. The 1.6 µm “snow and ice” band has a lot of uses, and I expect it will be a popular channel on the ABI. Here’s what the high-resolution channel looks like from VIIRS:

Comparison of VIIRS high-resolution near-IR (I-3) images

Comparison of VIIRS high-resolution near-IR (I-3) images

Compare these with the visible images above. Now, the reverse is true: Lake Mille Lacs is easier to see in the first image than the second! You can’t call it invisible at all on 27 January! The presence of liquid water makes the slush very absorbing – more than even ice and snow – so it appears nearly black. In fact, it’s hard to tell the difference between the slushy ice-covered Lake Mille Lacs, and the open waters of Lake Superior, which has no ice or slush on it. On 2 February, we see the fresh layer of snow on Lake Mille Lacs has increased the lake’s reflectivity, but it’s still slightly darker than the surrounding snow covered land. This is for two reasons: snow and ice are absorbing at 1.6 µm and the surrounding woodlands are more reflective.

Here’s a better comparison between the “visible” and the “snow and ice” bands:

Comparison of VIIRS I-1 and I-3 images (animation)

Comparison of VIIRS I-1 and I-3 images (animation)

You’ll have to click on the image to see it animate between the two.

Here’s an animation showing all five high-resolution bands on VIIRS for the two days:

Comparison of VIIRS high-resolution imagery channels (animation)

Comparison of VIIRS high-resolution imagery channels (animation)

Again, you have to click on it to see it animate.

Now, we can combine channels into RGB composites that highlight the snow and ice. We’ve discussed several RGB composites for snow detection before. And, we have been looking at the Natural Color RGB for a long time. This composite combines the high-resolution bands I-1 (0.64 µm), I-2 (0.86 µm) and I-3 (1.6 µm) as the blue, green and red components of the image, respectively. Here’s what it looks like for these two days:

Comparison of VIIRS Natural Color RGB composites

Comparison of VIIRS Natural Color RGB composites using high-resolution imagery bands

Lake Mille Lacs is visible on both days – first because it’s darker than the surroundings, then because it’s brighter. This composite demonstrates how vegetation can obscure the surface snow – it appears more brown in deciduous forests (and bare fields with no snow) and green in coniferous areas. But, the important point is that the wetter the snow and slush, the darker it appears. The fresher the snow, the brighter cyan color it has.

This is exaggerated in the “Snow RGB” that combines moderate resolution bands M-11 (2.25 µm), M-10 (1.6 µm) and M-7 (0.86 µm):

Comparison of VIIRS "Snow RGB" composites of channels M-11, M-10 and M-7

Comparison of VIIRS “Snow RGB” composites of channels M-11, M-10 and M-7

M-11 (2.25 µm) is sold as a “cloud particle size” band, but it also helps with snow and ice detection (and fires). The presence of water in melting snow enhances the darkening at 2.25 µm. In this RGB, that means melting snow appears more red, while fresh snow appears more pink. The slush on Lake Mille Lacs appears very dark – almost as dark as Lake Superior – so a Minnesotan might be forgiven if they see the image from 27 January and decide not to drive out on the lake to go ice fishing because they think the ice isn’t there.

Of course, VIIRS also gives us the True Color RGB – the most intuitive RGB composite – that combines the blue-, green- and red-wavelength visible bands: M-3 (0.48 µm), M-4 (0.55 µm) and M-5 (0.67 µm). If you’re curious, here’s what that looks like:

Comparison of VIIRS True Color RGB composite images

Comparison of VIIRS True Color RGB composite images

The slush on Lake Mille Lacs looks just like dirty slush and the fresh snow looks just like snow. (As it should!)

So, the second biggest lake in Minnesota never disappeared – it just changed its surface properties. And, it will always be “visible” to VIIRS in one channel or another – unless it’s cloudy (or it completely dries up).

December Fluff

By now, you probably know the drill: a little bit of discussion about a particular subject, throw in a few pop culture references, maybe a video or two, then get to the good stuff – high quality VIIRS imagery. Then, maybe add some follow-up discussion to emphasize how VIIRS can be used to detect, monitor, or improve our understanding of the subject in question. Not today.

You see, VIIRS is constantly taking high quality images of the Earth (except during orbital maneuvers or rare glitches). There isn’t enough time in a day to show them all, or go into a detailed discussion as to their relevance. And, nobody likes to read that much anyway. So, as we busily prepare for the upcoming holidays, we’re going to skip the in-depth discussion and get right to the good stuff.

Here then is a sample of interesting images taken by VIIRS over the years that weren’t featured on their own dedicated blog posts. Keep in mind that they represent the variety of topics that VIIRS can shed some light on. Many of these images represent topics that have already been discussed in great detail in previous posts on this blog. Others haven’t. It is important to keep in mind… See, I’m starting to write too much, which I said I wasn’t going to do. I’ll shut up now.

Without further ado, here’s a VIIRS Natural Color image showing a lake-effect snow event that produced a significant amount of the fluffy, white stuff back in November 2014:

VIIRS Natural Color RGB composite of channels M-5, M-7 and M-10 (18:20 UTC 18 November 2014)

VIIRS Natural Color RGB composite of channels M-5, M-7 and M-10 (18:20 UTC 18 November 2014)

As always, click on the image to bring up the full resolution version. Did you notice all the cloud streets? How about the fact that the most vigorous cloud streets have a cyan color, indicating that they are topped with ice crystals? The whitish clouds are topped with liquid water and… Oops. I’m starting to discuss things in too much detail, which I wasn’t going to do today. Let’s move on.

Here’s another Natural Color RGB image using the high-resolution imagery bands showing a variety of cloud streets and wave clouds over the North Island of New Zealand:

VIIRS Natural Color RGB composite of channels I-1, I-2 and I-3 (02:55 UTC 3 September 2016)

VIIRS Natural Color RGB composite of channels I-1, I-2 and I-3 (02:55 UTC 3 September 2016)

Here’s a Natural Color RGB image showing a total solar eclipse over Scandinavia in 2015:

VIIRS Natural Color RGB composite of channels M-5, M-7 and M-10 (10:06 UTC 20 March 2015)

VIIRS Natural Color RGB composite of channels M-5, M-7 and M-10 (10:06 UTC 20 March 2015)

Here’s a VIIRS True Color image and split-window difference (M-15 – M-16) image showing volcanic ash from the eruption of the volcano Sangeang Api in Indonesia in May 2014:

VIIRS True Color RGB composite of channels M-3, M-4 and M-5 (06:20 UTC 31 May 2014)

VIIRS True Color RGB composite of channels M-3, M-4 and M-5 (06:20 UTC 31 May 2014)

VIIRS split-window difference (M-15 - M-16) image (06:20 UTC 31 May 2014)

VIIRS split-window difference (M-15 – M-16) image (06:20 UTC 31 May 2014)

Here’s a VIIRS True Color image showing algae and blowing dust over the northern end of the Caspian Sea (plus an almost-bone-dry Aral Sea):

VIIRS True Color RGB composite of channels M-3, M-4 and M-5 (09:00 UTC 18 May 2014)

VIIRS True Color RGB composite of channels M-3, M-4 and M-5 (09:00 UTC 18 May 2014)

Here is a high-resolution infrared (I-5) image showing a very strong temperature gradient in the Pacific Ocean, off the coast of Hokkaido (Japan):

VIIRS I-5 (11.45 um) image (03:45 UTC 12 December 2016)

VIIRS I-5 (11.45 um) image (03:45 UTC 12 December 2016)

The green-to-red transition just southeast of Hokkaido represents a sea surface temperature change of about 10 K (18 °F) over a distance of 3-5 pixels (1-2 km). This is in a location that the high-resolution Natural Color RGB shows to be ice- and cloud-free:

VIIRS Natural Color RGB composite of channels I-1, I-2 and I-3 (03:45 UTC 12 December 2016)

VIIRS Natural Color RGB composite of channels I-1, I-2 and I-3 (03:45 UTC 12 December 2016)

Here’s a high-resolution infrared (I-5) image showing hurricanes Madeline and Lester headed toward Hawaii from earlier this year:

VIIRS I-5 (11.45 um) image (22:55 UTC 30 August 2016)

VIIRS I-5 (11.45 um) image (22:55 UTC 30 August 2016)

Here are the Fire Temperature RGB (daytime) and Day/Night Band (nighttime) images of a massive collection of wildfires over central Siberia in September 2016:

VIIRS Fire Temperature RGB composite of channels M-10, M-11 and M-12 (05:20 UTC 18 September 2016)

VIIRS Fire Temperature RGB composite of channels M-10, M-11 and M-12 (05:20 UTC 18 September 2016)

VIIRS Day/Night Band image (19:11 UTC 18 September 2016)

VIIRS Day/Night Band image (19:11 UTC 18 September 2016)

Here is a 5-orbit composite of VIIRS Day/Night Band images showing the aurora borealis over Canada (August 2016):

Day/Night Band image composite of 5 consecutive VIIRS orbits (30 August 2016)

Day/Night Band image composite of 5 consecutive VIIRS orbits (30 August 2016)

Here is a view of central Europe at night from the Day/Night Band:

VIIRS Day/Night Band image (01:20 UTC 21 September 2016)

VIIRS Day/Night Band image (01:20 UTC 21 September 2016)

And, finally, for no reason at all, here’s is a picture of Spain wearing a Santa hat (or sleeping cap) made out of clouds:

VIIRS Natural Color RGB composite of channels M-5, M-7 and M-10 (13:05 UTC 18 March 2014)

VIIRS Natural Color RGB composite of channels M-5, M-7 and M-10 (13:05 UTC 18 March 2014)

There you have it. A baker’s ten examples showing a small sample of what VIIRS can do. No doubt it will be taking more interesting images over the next two weeks, since it doesn’t stop working over the holidays – even if you and I do.