December Fluff

By now, you probably know the drill: a little bit of discussion about a particular subject, throw in a few pop culture references, maybe a video or two, then get to the good stuff – high quality VIIRS imagery. Then, maybe add some follow-up discussion to emphasize how VIIRS can be used to detect, monitor, or improve our understanding of the subject in question. Not today.

You see, VIIRS is constantly taking high quality images of the Earth (except during orbital maneuvers or rare glitches). There isn’t enough time in a day to show them all, or go into a detailed discussion as to their relevance. And, nobody likes to read that much anyway. So, as we busily prepare for the upcoming holidays, we’re going to skip the in-depth discussion and get right to the good stuff.

Here then is a sample of interesting images taken by VIIRS over the years that weren’t featured on their own dedicated blog posts. Keep in mind that they represent the variety of topics that VIIRS can shed some light on. Many of these images represent topics that have already been discussed in great detail in previous posts on this blog. Others haven’t. It is important to keep in mind… See, I’m starting to write too much, which I said I wasn’t going to do. I’ll shut up now.

Without further ado, here’s a VIIRS Natural Color image showing a lake-effect snow event that produced a significant amount of the fluffy, white stuff back in November 2014:

VIIRS Natural Color RGB composite of channels M-5, M-7 and M-10 (18:20 UTC 18 November 2014)

VIIRS Natural Color RGB composite of channels M-5, M-7 and M-10 (18:20 UTC 18 November 2014)

As always, click on the image to bring up the full resolution version. Did you notice all the cloud streets? How about the fact that the most vigorous cloud streets have a cyan color, indicating that they are topped with ice crystals? The whitish clouds are topped with liquid water and… Oops. I’m starting to discuss things in too much detail, which I wasn’t going to do today. Let’s move on.

Here’s another Natural Color RGB image using the high-resolution imagery bands showing a variety of cloud streets and wave clouds over the North Island of New Zealand:

VIIRS Natural Color RGB composite of channels I-1, I-2 and I-3 (02:55 UTC 3 September 2016)

VIIRS Natural Color RGB composite of channels I-1, I-2 and I-3 (02:55 UTC 3 September 2016)

Here’s a Natural Color RGB image showing a total solar eclipse over Scandinavia in 2015:

VIIRS Natural Color RGB composite of channels M-5, M-7 and M-10 (10:06 UTC 20 March 2015)

VIIRS Natural Color RGB composite of channels M-5, M-7 and M-10 (10:06 UTC 20 March 2015)

Here’s a VIIRS True Color image and split-window difference (M-15 – M-16) image showing volcanic ash from the eruption of the volcano Sangeang Api in Indonesia in May 2014:

VIIRS True Color RGB composite of channels M-3, M-4 and M-5 (06:20 UTC 31 May 2014)

VIIRS True Color RGB composite of channels M-3, M-4 and M-5 (06:20 UTC 31 May 2014)

VIIRS split-window difference (M-15 - M-16) image (06:20 UTC 31 May 2014)

VIIRS split-window difference (M-15 – M-16) image (06:20 UTC 31 May 2014)

Here’s a VIIRS True Color image showing algae and blowing dust over the northern end of the Caspian Sea (plus an almost-bone-dry Aral Sea):

VIIRS True Color RGB composite of channels M-3, M-4 and M-5 (09:00 UTC 18 May 2014)

VIIRS True Color RGB composite of channels M-3, M-4 and M-5 (09:00 UTC 18 May 2014)

Here is a high-resolution infrared (I-5) image showing a very strong temperature gradient in the Pacific Ocean, off the coast of Hokkaido (Japan):

VIIRS I-5 (11.45 um) image (03:45 UTC 12 December 2016)

VIIRS I-5 (11.45 um) image (03:45 UTC 12 December 2016)

The green-to-red transition just southeast of Hokkaido represents a sea surface temperature change of about 10 K (18 °F) over a distance of 3-5 pixels (1-2 km). This is in a location that the high-resolution Natural Color RGB shows to be ice- and cloud-free:

VIIRS Natural Color RGB composite of channels I-1, I-2 and I-3 (03:45 UTC 12 December 2016)

VIIRS Natural Color RGB composite of channels I-1, I-2 and I-3 (03:45 UTC 12 December 2016)

Here’s a high-resolution infrared (I-5) image showing hurricanes Madeline and Lester headed toward Hawaii from earlier this year:

VIIRS I-5 (11.45 um) image (22:55 UTC 30 August 2016)

VIIRS I-5 (11.45 um) image (22:55 UTC 30 August 2016)

Here are the Fire Temperature RGB (daytime) and Day/Night Band (nighttime) images of a massive collection of wildfires over central Siberia in September 2016:

VIIRS Fire Temperature RGB composite of channels M-10, M-11 and M-12 (05:20 UTC 18 September 2016)

VIIRS Fire Temperature RGB composite of channels M-10, M-11 and M-12 (05:20 UTC 18 September 2016)

VIIRS Day/Night Band image (19:11 UTC 18 September 2016)

VIIRS Day/Night Band image (19:11 UTC 18 September 2016)

Here is a 5-orbit composite of VIIRS Day/Night Band images showing the aurora borealis over Canada (August 2016):

Day/Night Band image composite of 5 consecutive VIIRS orbits (30 August 2016)

Day/Night Band image composite of 5 consecutive VIIRS orbits (30 August 2016)

Here is a view of central Europe at night from the Day/Night Band:

VIIRS Day/Night Band image (01:20 UTC 21 September 2016)

VIIRS Day/Night Band image (01:20 UTC 21 September 2016)

And, finally, for no reason at all, here’s is a picture of Spain wearing a Santa hat (or sleeping cap) made out of clouds:

VIIRS Natural Color RGB composite of channels M-5, M-7 and M-10 (13:05 UTC 18 March 2014)

VIIRS Natural Color RGB composite of channels M-5, M-7 and M-10 (13:05 UTC 18 March 2014)

There you have it. A baker’s ten examples showing a small sample of what VIIRS can do. No doubt it will be taking more interesting images over the next two weeks, since it doesn’t stop working over the holidays – even if you and I do.

Germany’s Magic Sparkle

You may or may not have heard that a small town in Italy received 100 inches (250 cm; 2.5 m; 8⅓ feet; 8 x 10-17 parsecs) of snow in 18 hours just last week (5 March 2015). That’s a lot of snow! It’s more than what fell on İnebolu, Turkey back in the beginning of January. But, something else happened that week that is much more interesting.

All you skiers are asking, “What could be more interesting than 100 inches of fresh powder?” And all you weather-weenies are asking, “What could be more interesting than being buried under a monster snowstorm? I mean, that makes Buffalo look like the Atacama Desert!” The answer: well, you’ll have to read the rest of this post. Besides, VIIRS is incapable of measuring snow depth. (Visible and infrared wavelengths just don’t give you that kind of information.) So, looking at VIIRS imagery of that event isn’t that informative.

This is (or was, until I looked into it in more detail) another mystery. Not a spooky, middle-of-the-night mystery, but one out in broad daylight. (We can thus automatically rule out vampires.)

It started with a comparison between “True Color” and “Natural Color” images over Germany from 9 March 2015:

VIIRS True Color RGB composite of channels M-3, M-4 and M-5, taken 11:54 UTC 9 March 2015

VIIRS True Color RGB composite of channels M-3, M-4 and M-5, taken 11:54 UTC 9 March 2015.

VIIRS Natural Color RGB composite of channels M-5, M-7 and M-10, taken 11:54 UTC 9 March 2015

VIIRS Natural Color RGB composite of channels M-5, M-7 and M-10, taken 11:54 UTC 9 March 2015.

The point was to show, once again, how the Natural Color RGB composite can be used to differentiate snow from low clouds. That’s when I noticed it. Bright pixels (some white, some orange, some yellow, some peach-colored) in the Natural Color image, mostly over Bavaria. (Remember, you can click on the images, then click again, to see them in full resolution.) Thinking they might be fires, I plotted up our very own Fire Temperature RGB:

VIIRS Fire Temperature RGB composite of channels M-10, M-11 and M-12 from 11:54 UTC 9 March 2015

VIIRS Fire Temperature RGB composite of channels M-10, M-11 and M-12 from 11:54 UTC 9 March 2015.

I’ve gone ahead and drawn a white box around the area of interest. Let’s zoom in on that area for these (and future) images.

VIIRS True Color RGB (11:54 UTC 9 March 2015)

VIIRS True Color RGB (11:54 UTC 9 March 2015). Zoomed in and cropped to highlight the area of interest.

VIIRS Natural Color RGB (11:54 UTC 9 March 2015)

VIIRS Natural Color RGB (11:54 UTC 9 March 2015). Zoomed in and cropped to highlight the area of interest.

VIIRS Fire Temperature RGB (11:54 UTC 9 March 2015)

VIIRS Fire Temperature RGB (11:54 UTC 9 March 2015). Zoomed in and cropped to highlight the area of interest.

Now, these spots really show up. But, they’re not fires! Fires show up red, orange, yellow or white in the Fire Temperature composite (which is one of the benefits of it). They don’t appear pink or pastel blue. What the heck is going on?

Now, wait! Go back to the True Color image and look at it at full resolution. There are white spots right where the pastel pixels show up in the Fire Temperature image. (I didn’t notice initially, because white spots could be cloud, or snow, or sunglint.) This is another piece of evidence that suggests we’re not looking at fires.

For a fire to show up in True Color images, it would have to be about as hot as the surface of the sun and cover a significant portion of a 750-m pixel. Terrestrial fires don’t typically get that big or hot on the scale needed for VIIRS to see them at visible wavelengths. Now, fires don’t have to be that hot to show up in Natural Color images, but even then they appear red. Not white or peach-colored. If a fire was big enough and hot enough to show up in a True Color image, it would certainly show up in the high-resolution infrared (IR) channel (I-05, 11.45 µm), but it doesn’t:

VIIRS high-resolution IR (I-05) image (11:54 UTC 9 March 2015)

VIIRS high-resolution IR (I-05) image (11:54 UTC 9 March 2015).

You might be fooled, however, if you looked at the mid-wave IR (I-04, 3.7 µm) where these do look like hot spots:

VIIRS high-resolution midwave-IR (I-04) image (11:54 UTC 9 March 2015)

VIIRS high-resolution midwave-IR (I-04) image (11:54 UTC 9 March 2015).

What’s more amazing is I was able to see these bright spots all the way down to channel M-1 (0.412 µm), the shortest wavelength channel on VIIRS:

VIIRS "deep blue" visible (M-1) image (11:54 UTC 9 March 2015)

VIIRS “deep blue” visible (M-1) image (11:54 UTC 9 March 2015).

So, what do we know? Bright spots appear in all the bands where solar reflection contributes to the total radiance (except M-6 and M-9). I checked. (They don’t show up in M-6 [0.75 µm], because that channel is designed to saturate under any solar reflection so everything over land looks bright. They don’t show up in M-9 [1.38 µm] because solar radiation in that band is absorbed by water vapor and never makes it to the surface.) Hot spots do not coincide with these bright spots in the longer wavelength IR channels (above 4 µm).

What reflects a lot of radiation in the visible and near-IR but does not emit a lot in the longwave IR? Solar panels. That’s the answer to the mystery. VIIRS was able to see solar radiation reflecting off of a whole bunch of solar panels. That is the source of Germany’s “magic sparkle”.

Don’t believe me? First off, Germany is a world leader when it comes to producing electricity from solar panels. Solar farms (or “solar parks” auf Deutsch) are common – particularly in Bavaria, which produces the most solar power per capita of any German state.

Second: I was able to link specific solar parks with the bright spots in the above images using this website. (Not all of those solar parks show up in VIIRS, though. I’ll get to that.) And these solar parks can get quite big. Let’s take a look at a couple of average-sized solar parks on Google Maps: here and here. The brightest spot in the VIIRS Fire Temperature image (near 49° N, 11° E) matches up with this solar park, which is almost perfectly aligned with the VIIRS scans and perpendicular to the satellite track.

Third: it’s not just solar parks. A lot of people and businesses have solar panels on their roofs. Zoom in on Pfeffenhausen, and try to count the number of solar panels you see on buildings.

One more thing: if you think solar panels don’t reflect a lot of sunlight, you’re wrong. Solar power plants have been known reflect so much light they instantly incinerate birds*. (*This is not exactly true. See the update below.)

Another important detail is that all of the bright spots visible in the VIIRS images are a few degrees (in terms of satellite viewing angle) to the west of nadir. Given where the sun is in the sky this time of year (early March) and this time of day (noon) at this latitude (48° to 50° N), a lot of these solar panels are in the perfect position to reflect sunlight up to the satellite. But, not all of them. Some solar panels track the sun and move throughout the day. Other panels are fixed in place and don’t move. Only the solar panels in the right orientation relative to the satellite and the sun will be visible to VIIRS.

At these latitudes during the day, the sun is always to south and slightly to the west of the satellite. For the most part, solar panels to the east of the satellite will reflect light away from the satellite, which is why you don’t see any of those. If the panel is pointed too close to the horizon, or too close to zenith (or the sun is too high or too low in the sky), the sunlight will be reflected behind or ahead of the satellite and won’t be seen. You could say that this “sparkle” is actually another form of glint, like sun glint or moon glint – only this is “solar panel glint”.

Here’s a Natural Color image from the very next day (10 March 2015), when the satellite was a little bit further east and overhead a little bit earlier in the day:

VIIRS Natural Color RGB composite of channels M-5, M-7 and M-10 from 11:35 UTC 10 March 2015

VIIRS Natural Color RGB composite of channels M-5, M-7 and M-10 from 11:35 UTC 10 March 2015.

Notice the half-dozen-or-so bright spots over the Czech Republic. These are just west of the satellite track and in the same position relative to satellite and sun. (The bright spot near the borders of Austria and Slovakia matches up with this solar farm.) The bright spots over Germany are gone because they no longer line up with the sun and satellite geometry.

As for the pastel colors in the Natural Color and Fire Temperature RGBs, those are related to the proportional surface area of the solar panels relative to the size of each pixel as well as the background reflectivity of the ground surrounding the solar panels. The bright spots do generally appear more white in the high-resolution version of the Natural Color RGB from 9 March:

VIIRS high-resolution Natural Color (I-01, I-02, I-03) RGB image (11:54 UTC 9 March 2015)

VIIRS high-resolution Natural Color (I-01, I-02, I-03) RGB image (11:54 UTC 9 March 2015).

See, we learned something today. Germany sparkles with green electricity and VIIRS can see it!

UPDATES (17 March 2015): Thanks to feedback from Renate B., who grew up in Bavaria and currently owns solar panels, we have this additional information: there is a push to add solar panels onto church roofs throughout Bavaria, since they tend to be the tallest buildings in town (not shaded by anything) and are typically positioned facing east, so the south-facing roof slopes are ideal for collecting sunlight. The hurdle is that churches are protected historical buildings that people don’t want to be damaged. Also, it’s not a coincidence that many solar parks have their solar panels facing southeast (and align with the VIIRS scan direction). They are more efficient at producing electricity in the morning, when the temperatures are lower, than they are in the afternoon when the panels are warmer. They face southeast to better capture the morning sun.

Also, to clarify (as pointed out by Ed S.): the solar power plant that incinerates birds generates electricity from a different mechanism than the photovoltaic (PV) arrays seen in these images from Germany. PV arrays (aka solar parks) convert direct sunlight to electricity. The “bird incinerator” uses a large array of mirrors to focus sunlight on a tower filled with water. The focused sunlight heats the water until it boils, generating steam that powers a turbine. Solar parks and solar panels on houses and churches do not cause birds to burst into flames.

Bárðarbunga, the Toxic Tourist Trap

Quick: what was the name of that Icelandic volcano that caused such a stir a few years ago? Oh, that’s right. You don’t remember. No one remembers. (Unless you live outside the U.S. in a place where you might have actually heard someone say the name correctly.) To Americans, it will forever be known as “That Icelandic Volcano” or “The Volcano That Nobody Can Pronounce” – even though it is possible to pronounce the name. Say it with me: Eye-a-Fiat-la-yo-could (Eyjafjallajökull).

Well, back at the end of August 2014 another volcano erupted in Iceland, and there is no excuse for not being able to pronounce this name correctly: Bárðarbunga. (OK, you have one excuse: use of the letter ð is uncommon outside of Iceland. In linguistics, ð is a “voiced dental fricative” which, in English, is a voiced “th”. “The” has a voiced “th”. “Theme” has an un-voiced “th” or, rather,  “voiceless dental non-sibilant fricative“.) Look, you don’t want to offend any Icelanders, so say it right:

“Bowr-thar-Bunga.” See, it’s easy to say. (You may see people who are afraid of the letter ð refer to the recent eruption as Holuhraun [pronounced “Ho-lu-roin”], because Bárðarbunga is part of the Holuhraun lava field. So be aware of that.)

I know what you’re going to ask: “What is so special about this volcano? I haven’t heard anything about it up to this point, so why should I care?” You haven’t heard anything about it because you don’t live in Iceland or in Europe, which is downwind of Iceland. And, why should you care? Let me count the ways in the rest of this blog post.

You probably have heard of Kīlauea (and have no trouble pronouncing that name) and the lava flow that inched its way towards the town of Pahoa. Kīlauea has been continuously erupting since 1983. Bárðarbunga erupted on 29 August 2014 and has been spewing lava ever since, which at this point, is over 100 days of non-stop erupting. It’s Iceland’s version of Kīlauea. (Hopefully, it won’t continue to erupt for another 30 years.)

Just like Kīlauea, Bárðarbunga is attracting tourists from all over the world. It seems every wannabe photographer and videographer has gone (or wants to go) to Iceland to try to come up with the next viral video showing the breathtaking lava flows. Seriously, do a search for Bardarbunga or Holuhraun on YouTube or vimeo and see how many results show up. Here’s a pretty typical example (filmed by someone from Iceland):

Want to join in the fun? Just grab your camera, head to Iceland, hire an airplane or helicopter pilot, and find the most dramatic music you can think of to go along with your footage. Watch out, though – the airspace around the volcano can be rather crowded. As this video shows, it can be hard to film the volcano without other aircraft getting in the way.

If photography is more your thing, here are the latest images of the eruption on Twitter. (Look for the pictures of Beyonce and Jay-Z. If Twitter is correct, they flew over the volcano for his birthday. Viewing the eruption has gone mainstream! You’re too late, hipsters! Good luck getting to the next volcanic eruption before it becomes cool.)

Back to the matter at hand: why you should care about Bárðarbunga. After its first 100 days of erupting, it has created a field of new lava (76 km2) that is larger than the island of Manhattan (59 km2). The volcano has been creating a toxic plume of SO2 for the last 100 days that is making it difficult to breathe. (Here are some of the known health effects of breathing SO2.) SO2 can ultimately be converted into sulfuric acid (acid rain), depending on the chemistry in the air around the volcano. And while it may not be producing as much ash as Eyjafjallajökull did, VIIRS imagery shows it is producing ash, which is a threat to aircraft.

If you follow this blog, you know the best RGB composite for detecting ash is the True Color composite. This is because the visible wavelength channels that make the composite are sensitive to the scattering of light by small particles, like dust, smoke and ash. Iceland is a pretty cloudy place, so it’s not always easy to spot the ash plume, so here it is at its most visible:

VIIRS True Color RGB composite of channels M-3, M-4 and M-5, taken 12:57 UTC 11 September 2014

VIIRS True Color RGB composite of channels M-3, M-4 and M-5, taken 12:57 UTC 11 September 2014. The red arrow points to the location of Bárðarbunga.

Click on the image (or any other image) to see the full resolution version. The red arrow shows the location of Bárðarbunga. In case you’re wondering, the borders drawn inside the island are IDL’s knowledge of the boundaries of lakes and glaciers (jökull in Icelandic). The big one just south of the red arrow is Vatnajökull – the largest glacier in Europe and one of three national parks in Iceland. (If you want to go there, be aware of closures due to volcanic activity.)

See the ash plume extending from the red arrow to the east-northeast out over the Atlantic Ocean? Now, try to find the ash plume in this animation of True Color images from 29 August to 14 October 2014:

Animation of VIIRS True Color images of Iceland 29 August - 14 October 2014

Animation of VIIRS True Color images of Iceland 29 August – 14 October 2014

As with most of my animations, I have selectively removed images where it was too cloudy to see anything. Sometimes, the steam from the volcano mixes with the ash to make its own clouds, much like a pyrocumulus. Watch for the ash to get blown to the northwest and then southwest in early October. In case you can’t see it, here’s a static example:

VIIRS True Color RGB composite of channels M-3, M-4 and M-5, taken 12:15 UTC 10 October 2014

VIIRS True Color RGB composite of channels M-3, M-4 and M-5, taken 12:15 UTC 10 October 2014. The red arrow shows the location of Reykjavik.

This time, the red arrow shows Reykjavik, the nation’s capitol and likely only city in Iceland you’ve heard of. The ash plume is pretty much right over Reykjavik!

Over the course of the first 100 days, no place in Iceland has been kept safe from the ash plume. But, that’s not the only threat from Bárðarbunga: I also mentioned SO2. If you recall from our look at Copahue (Co-pa-hway – say it right!) the EUMETSAT Dust algorithm is sensitive to SO2. So, can we detect the toxic sulfur dioxide plume from Bárðarbunga? Of course! But, it does depend on cloudiness and just how much (and how high) SO2 is being pumped into the atmosphere.

If you read my post on Copahue, you should have no trouble picking out the sulfur dioxide plume in this image of Bárðarbunga:

EUMETSAT Dust RGB composite applied to VIIRS, 12:57 UTC 11 September 2014

EUMETSAT Dust RGB composite applied to VIIRS, 12:57 UTC 11 September 2014

This image is from the same time as the first True Color image above, when the plume was very easy to see. Also note the large quantity of contrails (aka “chemtrails” to the easily misled). Those are the linear black streaks west of Iceland. If you’re confident in your ability to see the sulfur dioxide, see how often you can pick it out in this animation:

Animation of EUMETSAT Dust RGB images from VIIRS (29 August - 10 October 2014)

Animation of EUMETSAT Dust RGB images from VIIRS (29 August – 10 October 2014)

Some detail is lost because an RGB composite may contain as many as 16 million colors, while the .gif image standard only allows 256. But, you can still see the pastel-colored SO2 plume, which almost looks greenish under certain conditions due to interactions with clouds. Also note the volcano itself appears cyan – the hottest part of the image has a cool color! Unusual in a composite that makes almost everything appear red or pink.

If you want to see the volcano look more like a hot spot, here are animations of the shortwave IR (M-13, 4.0 µm) and the Fire Temperature RGB composite (which I promote whenever I can). I should preface these animations by saying I have not removed excessively cloudy images but, at least 80% of the days have two VIIRS afternoon overpasses and, to reduce filesizes, I have kept only one image per day:

Animation of VIIRS M-13 images of Iceland (29 August - 15 October 2014)

Animation of VIIRS M-13 images of Iceland (29 August – 15 October 2014)

The Fire Temperature RGB is made up of M-10 (1.6 µm; blue), M-11 (2.25 µm; green) and M-12 (3.7 µm; red):

Animation of VIIRS Fire Temperature RGB images of Iceland (29 August - 15 October 2014)

Animation of VIIRS Fire Temperature RGB images of Iceland (29 August – 15 October 2014)

No surprise, molten rock is quite hot! That area of lava has saturated my color table for M-13 and it saturated the Fire Temperature RGB. As I’ve said before, only the hottest fires show up white in the Fire Temperature RGB and lava is among the hottest things you’ll see with VIIRS. Sometimes, you can see the heat from the volcano through clouds (and certainly through the ash plume)! It’s also neat to watch the river of lava extend out to the northeast and then cool.

To quantify it a bit more, the first day VIIRS was able to see the hot spot of Bárðarbunga (31 August 2014), the M-13 brightness temperature was the highest I’ve seen yet: 631.99 K. The other midwave-IR channels (M-12 and I-4; 3.7 and 3.74 µm, respectively) saturate at 368 K. The Little Bear Fire (2012) peaked at 588 K and that fire was hot enough to show up in M-10 (1.6 µm) during the day, so it’s no wonder that we’ve saturated the Fire Temperature RGB.

There’s one more interesting way to look at Bárðarbunga using a new RGB composite. When I was first tipped to this event, I saw this image from NASA, which you can read more about here. That image was taken by the Operational Land Imager (OLI) from Landsat-8 and is a combination of “green, near-infrared and shortwave infrared” channels. Applying this to VIIRS, that combination becomes M-4 (0.55 µm), M-7 (0.87 µm) and M-11 (2.25 µm), which is similar to the Natural Color composite (M-5, 0.64 µm; M-7, 0.87 µm; M-10, 1.61 µm) except for a few notable differences. M-4 is more sensitive to smoke and ash and vegetation than M-5. And M-11 is more sensitive to fires and other hotspots than M-10.

The differences are subtle, but you can see them in this direct comparison:

Comparison between VIIRS "Natural Color" and "False Color with Shortwave IR" RGB composites (12:38 UTC 14 October 2014)

Comparison between VIIRS “Natural Color” and “False Color with Shortwave IR” RGB composites (12:38 UTC 14 October 2014)

NASA calls this RGB composite “False Color with Shortwave Infrared,” although I’m sure there has to be a better name. Any suggestions?

Most of my images and loops have come from the first 45 days after eruption. This was a very active period for the volcano, and is where most of the previously mentioned videos came from. (And trust me, you and your browser couldn’t handle the massive animations that would have resulted from using all 100+ days of images.) To prove Bárðarbunga has gone on beyond that, here’s one of the new RGB composites from 17 November 2014:

VIIRS false color RGB composite of channels M-4, M-7 and M-11, taken 13:42 UTC 17 November 2014

VIIRS false color RGB composite of channels M-4, M-7 and M-11, taken 13:42 UTC 17 November 2014

This image really makes Iceland look like a land of fire and ice, which is exactly what it is!

When China Looks Like Canada

OK, so there probably aren’t any “Canadatowns” in China like there are Chinatowns in Canada. (Now you’re probably wondering what a Canadatown in China would look like. Maybe stores and restaurants selling poutine and maple syrup? Hockey rinks and curling sheets everywhere? A Tim Hortons on every street corner?) But this isn’t about that!

Last time I made the comparison between Canada and China, it was because there were numerous fires, particularly in the Northwest Territories, that produced so much smoke that it choked the air, making it difficult to breathe. This smoke was visible all the way down to the Lower 48 United States. These huge smoke plumes looked a lot like Chinese super-smog. Today, we’re talking not about the smoke and smog… well, actually, smoke and smog will be mentioned… hmm. Uh, what I mean is we’re focusing on the zillions of fires that VIIRS saw over Manchuria – just like the zillions of fires in the Northwest Territories. Well, OK, not “just like” – those fires were caused by Mother Nature. These fires appear to be intentionally set by human beings and are much smaller.

A CIRA colleague was checking out a real-time loop of MTSAT 3.75 µm imagery over northeastern China and reported seeing bright spots (which are typically hot spots from fires) throughout the area for most of the last month. So what is going on there?

MTSAT has ~4 km spatial resolution, so it’s not the best for fire detection. (At the time of this writing, CIRA has access to MTSAT-2, aka Himawari-7, which has 4 km spatial resolution in the infrared channels. The Advanced Himawari Imager {AHI} was successfully launched on Himawari-8 on 7 October 2014 and, when the operational imagery becomes available, it will have 2 km resolution in this channel [and it will have many of the channels that VIIRS has]. CIRA has plans to acquire this data when it becomes available. Until then, you’ll have to deal with coarse spatial resolution.) To really see what is going on, you need the spatial resolution of VIIRS.

Of course, spatial resolution is not the only thing you need. Check out the VIIRS M-13 (4.0 µm)  image below from 04:48 UTC 18 November 2014. How many hot spots can you see?

VIIRS M-13 image of northeastern China, taken 04:48 UTC 18 November 2014

VIIRS M-13 image of northeastern China, taken 04:48 UTC 18 November 2014.

This image uses a color table specifically designed to highlight hot spots from fires. Any pixel above 317 K (44 °C or 111 °F) is colored. (As always, click on the image to see it in full resolution.) There aren’t that many colored pixels, even though we’re using a relatively low temperature threshold for fire detection. There are, however, a lot of nearly black pixels, which means they are warmer than the background, but not warm enough to be highlighted. (In case you’re not sure, I’m talking about the area between 45° and 48°N, 123° and 128°E.) If we used this temperature threshold in a summer scene, there would be a lot false alarm fire detections.

A situation like this is when the Fire Temperature RGB composite comes in handy. It can detect the small (or low temperature) fires with no problem, particularly since the background isn’t very warm. Try to count up all the red pixels in this image from the same time:

VIIRS Fire Temperature RGB composite of channels M-10, M-11 and M-12, taken 04:48 UTC 18 November 2014

VIIRS Fire Temperature RGB composite of channels M-10, M-11 and M-12, taken 04:48 UTC 18 November 2014.

That’s a lot of fires! It’s probably because there are so many of them that they were visible in MTSAT. If you look closely at the full resolution image, there are two significant fires in North Korea, plus many more smaller fires/hot spots northwest and north of the Yellow Sea. Go back and compare the Fire Temperature RGB with the M-13 image. Admit it: fires in this scene are easier to see in the RGB composite.

If you don’t believe me, check out the M-13 and Fire Temperature RGB images that have been zoomed in on main concentration of fires. The Fire Temperature RGB has been lightened a little bit and the M-13 image has been darkened a little bit to highlight the hot spots better.

VIIRS M-13 image (as above) but zoomed in and slightly darkened

VIIRS M-13 image (as above) but zoomed in and slightly darkened.

VIIRS Fire Temperature RGB image (as above) but zoomed in and lightened slightly

VIIRS Fire Temperature RGB image (as above) but zoomed in and lightened slightly.

If you want to know why the Fire Temperature RGB composite works, go back and read this and this. Otherwise, stay put. If you’re familiar with the Fire Temperature RGB, because you are a loyal follower of this blog, you may be wondering why the overall image looks so dark.

All the previous cases where I’ve shown this RGB have been in the summer, typically under bright sunlight (since fires don’t tend to occur in winter). Here, it’s almost winter so there is less sunlight and the background surface is colder, which are going to make the image appear darker. Plus, there is some snow in the scene and snow appears black in this RGB composite. It’s not reflective at 1.61 µm (blue component) or 2.25 µm (green component) or at 3.74 µm (red component), plus it’s cold so it doesn’t emit much radiation at any of these wavelengths either.

The Natural Color RGB shows where the snow is. Look for the cyan signature of snow and ice here:

VIIRS Natural Color RGB composite of channels M-5, M-7, and M-10, taken 04:48 UTC 18 November 2014

VIIRS Natural Color RGB composite of channels M-5, M-7, and M-10, taken 04:48 UTC 18 November 2014.

The Natural Color RGB shows that the fires are occurring in an area with a lot of lakes. Also, there isn’t a very strong green signature from vegetation in this area. So what is burning? Your guess is as good as mine. (Unless your guess is a bunch of Chinese children using magnifying glasses to burn ants. That’s not a very good guess – particularly because, as I said, there is less sunlight in the winter and it’s colder so the ants wouldn’t ignite easily. Also, that’s a cruel thing to suggest and my reasoned account of why that wouldn’t work should not be taken as an implicit admission that I ever did such a thing as a kid.)

A quick perusal of Google Maps reveals that it is an area full of agricultural fields. So my guess is that it’s some sort of end-of-year burning of agricultural waste. They are all small or low temperature fires and they’re not anything that made the news (I checked), so it’s doubtful that it’s a zillion uncontrolled fires.

How do we even know they’re fires? Besides the fact that they show up in the Fire Temperature RGB, we can also see the smoke. Check out this True Color RGB image and focus on the area where the majority of the fires are occurring:

VIIRS True Color RGB composite of channels M-3, M-4 and M-5, taken at 04:48 UTC 18 November 2014

VIIRS True Color RGB composite of channels M-3, M-4 and M-5, taken at 04:48 UTC 18 November 2014.

There are visible smoke plumes right where the greatest concentration of hot spots is located. There is also a long plume of gray along the base of the Changbai Mountains stretching southwest to the shores of the Yellow Sea, but it’s not clear if that is also smoke or simply smog. By the way, if you have respiratory ailments, don’t look at the southwest corner of the image (west of the Yellow Sea) because that’s definitely smog! The northern extent of that large area of smog is the Beijing metropolitan area.

What is most cough- and barf- inducing about that smog near Beijing is that it is thick enough to completely obscure the view of the surface. Last time we looked at that, it was record levels of smog that was receiving international attention. The thick, surface obscuring smog you see here isn’t record breaking or news-worthy – it’s simply a normal late fall day in eastern China!

If you can’t think of anything else to be thankful for on Thursday, you can be thankful that you don’t have to breathe air like that. Unless you live there. But, then, you wouldn’t be celebrating Thanksgiving anyway. And, if you live in Canada, you already had your Thanksgiving. You get to just sit back, relax, and watch Americans trample each other to death for discount electronics. Being able to avoid the Black Friday mob is something to be truly thankful for!

When Canada Looks Like China

No, I’m not talking about Chinatown in Vancouver. Or Chinatown in Toronto. Or any other Chinatown in Canada. I’m talking about this. Or, more exactly, this. Poor air quality is making it difficult to breathe in Canada and elsewhere.

Unlike the situation in China, you can’t really blame the Canadians for their poor air quality. (Unless, of course, some serial arsonist is wreaking havoc unfettered.) You see, it has been an active fire season in western Canada, to put it mildly. Here’s a not-so-mild way to put it. That article, from 3 July 2014, put the number of fires in the Northwest Territories alone at 123, with most of them caused by lightning. But, after a check of the Northwest Territories’ Live Fire Map on 30 July 2014 it looks like there are more than that:

"Live Fire Map" from NWTFire, acquired 17:00 UTC 30 July 2014

"Live Fire Map" from NWTFire, acquired 17:00 UTC 30 July 2014. This is a static image, not an interative map.

I estimated 160-170 fires in that image (assuming I didn’t double count or miss any). How many fires can you count?

At one point earlier in July, it was estimated that battling the fires was costing $1 million per day! The fires have been impacting power plants, causing power outages, impacting cellular and Internet service, closing the few roads that exist that far north, and doubling the number of respiratory illnesses reported in Yellowknife, the territory’s capital.

It’s no secret that this area is sparsely populated. At last count, the territory had roughly 41,000 residents in 1.3 million km2. (Fun fact: the Northwest Territories used to make up 75% of the land area of Canada. It has since been split up among 5 provinces and into two other territories. With the formation of Nunavut in 1999, it was reduced to being only twice the size of Texas.) If so few people live there, why should we care if they have a few fires?

If you are so heartless as to ask that question, you are also short-sighted and selfish. For one, I already explained the damage that the fires are doing. For two, fires like these impact more than just the immediate area and more than just Canada. Let me explain that but, first, let me show you the fires themselves – as seen by VIIRS – over the course of the last month.

Animation of VIIRS Fire Temperature RGB images 24 June - 25 July 2014

Animation of VIIRS Fire Temperature RGB images 24 June - 25 July 2014

You will have to click on the above image, then on the “933×700” link below the banner to see the animation at full resolution. It is 15 MB, so it may take a while to load if you have limited bandwidth. What you are looking at is the Fire Temperature RGB in the area of Great Slave Lake, the area hardest hit by this fire season. There are a lot of fires visible over the course of the month!

See how the larger fires spread out? They look like the large scale version of an individual flame spreading out on a piece of paper. (Don’t try to replicate it at home. I don’t want you catching your house on fire!) Of course, the spread of the fires is dependent on the winds, humidity, moisture content in the vegetation, and the firefighters – if they’re doing their job.

Now, these weren’t the only fires in Canada during this time. Check out this Fire Temperature RGB image from 15 July 2014 and see how many (rather large) fires there are in British Columbia and Saskatchewan:

VIIRS Fire Temperature RGB composite of channels M-10, M-11 and M-12, taken 21:08 UTC 15 July 2014

VIIRS Fire Temperature RGB composite of channels M-10, M-11 and M-12, taken 21:08 UTC 15 July 2014

Make sure to click through to the full resolution version. I counted 9 large fires in British Columbia, 1 in Alberta (partially obscured by clouds) and 6 in Saskatchewan. If you look closely, you might also spot 3 small fires in Washington plus more small fires in Oregon. (“Small” here is compared to the fires in Canada.)

Now, all these fires means there must be smoke and, because VIIRS has channels in the blue and green portions of the visible spectrum, we can see the smoke clearly. This is one of the benefits of the True Color RGB (in addition to what we discussed last time). If I tried to create another animation, like I did above, showing the extent of the smoke plumes it would be so large it might crash the Internet. Instead, here are some of the highlights (or low-lights, depending on your point of view) from the last month.

On 6 July 2014, the smoke is largely confined to the area around Great Slave Lake:

VIIRS True Color RGB composite of channels M-3, M-4 and M-5, taken 20:35 UTC 6 July 2014

VIIRS True Color RGB composite of channels M-3, M-4 and M-5, taken 20:35 UTC 6 July 2014

The very next day (7 July 2014) the smoke is blown down into Alberta and Saskatchewan (almost as far south as Calgary and Saskatoon):

VIIRS True Color RGB composite of channels M-3, M-4 and M-5, taken 20:16 UTC 7 July 2014

VIIRS True Color RGB composite of channels M-3, M-4 and M-5, taken 20:16 UTC 7 July 2014

One day later (8 July 2014) smoke is visible down into Montana, North Dakota and beyond the edge of the image in South Dakota (a distance of over 2000 km [1200 miles] from the source!):

VIIRS True Color RGB composite of channels M-3, M-4 and M-5, taken 19:57 UTC 8 July 2014

VIIRS True Color RGB composite of channels M-3, M-4 and M-5, taken 19:57 UTC 8 July 2014

 

On the 12th of July, you could see a single smoke plume stretching from Great Slave Lake all the way into southwestern Manitoba (plus smoke over British Columbia from their fires):

VIIRS True Color RGB composite of channels M-3, M-4 and M-5, taken 20:23 UTC 12 July 2014

VIIRS True Color RGB composite of channels M-3, M-4 and M-5, taken 20:23 UTC 12 July 2014

When the fires really get going in British Columbia a few days later, the smoke covers most of western Canada. On 15 July 2014, smoke is visible from the state of Washington to the southern reaches of Nunavut and Hudson Bay:

VIIRS True Color RGB composite of channels M-3, M-4 and M-5, taken 19:27 UTC 15 July 2014

VIIRS True Color RGB composite of channels M-3, M-4 and M-5, taken 19:27 UTC 15 July 2014

One day later (16 July 2014), and it appears that smoke covers 2/3 of Alberta, nearly all of Saskatchewan, all of western Manitoba, southern Nunavut, southeastern Northwest Territories, and most of Montana and North Dakota. There is also smoke over Washington, Oregon and northern Idaho:

VIIRS True Color RGB composite of channels M-3, M-4 and M-5, taken 20:48 UTC 16 July 2014

VIIRS True Color RGB composite of channels M-3, M-4 and M-5, taken 20:48 UTC 16 July 2014

A quick estimate puts the area of smoke in the above image at 2.5 million km2, which is roughly a third the size of the contiguous 48 states!

With renewed activity in the fires in the Northwest Territories last week, the smoke was still going strong over Canada, impacting Churchill, Manitoba (home of polar bears and beluga whales):

VIIRS True Color RGB composite of channels M-4, M-4 and M-5, taken 20:17 UTC 23 July 2014

VIIRS True Color RGB composite of channels M-4, M-4 and M-5, taken 20:17 UTC 23 July 2014

I guess if the melting polar ice caps don’t kill off the polar bears, they can still get cancer from all this smoke. Maybe the “world’s saddest polar bear” will want to stay in Argentina.

I should add that some of my colleagues at CIRA and I have sensitive noses and were able to smell smoke right here in town (Fort Collins, Colorado) earlier this month. Plus, there were a few smoky/hazy sunsets. (Although it should be clarified that we don’t know if it was from the fires in Canada or the fires in Washington and Oregon. There weren’t any fires in Colorado at the time.) Nevertheless, the areal coverage and extent of the smoke from fires like these is immense, and can have impacts thousands of miles away from the source. And, it’s all carbon entering our atmosphere.

 

UPDATE (8/1/2014): Colleagues at CIMSS put together this image combining two orbits of data over North America from yesterday (31 July 2014), where you can see smoke stretching from Nunavut all the way down to Indiana, Ohio and West Virginia. There may even be some smoke over Kentucky and Tennessee. Witnesses at CIMSS reported very hazy skies across southern Wisconsin as a result.